BS-3134-3-1981 ISO-355-1977-ADDENDUM-2-1980.pdf

BRITISH STANDARD BS 3134-3: 1981 ISO 355:1977/ Addendum 2: 1980 Metric tapered roller bearings Part 3: Specification for dimensions of flanged cups ISO title: Metric tapered roller bearings Flanged cups Boundary dimensions UDC 621.822.87 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 This British Standard, having been prepared under the direction of the Mechanical Engineering Standards Committee, was published under the authority of the Executive Board and comes into effect on 31 March 1981 © BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MEE/30 Draft for comment 79/72452 DC ISBN 0 580 11681 6 Cooperating organizations The Mechanical Engineering Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following: The organizations marked with an asterisk in the above list, together with the following, were directly represented on the Technical Committee entrusted with the preparation of this British Standard: Associated Offices Technical CommitteeDepartment of Trade (Marine Division) Association of Consulting EngineersDepartment of Transport Association of Hydraulic EquipmentElectricity Supply Industry in England and ManufacturersWales Association of Mining Electrical andEngineering Equipment Users Association* Mechanical EngineersFederation of Manufacturers of Construction British Compressed Air SocietyEquipment and Cranes British Electrical and Allied ManufacturersHealth and Safety Executive Association (BEAMA)Institution of Gas Engineers British Gas CorporationInstitution of Mechanical Engineers* British Gear Manufacturers AssociationInstitution of Plant Engineers British Internal Combustion EngineInstitution of Production Engineers* Manufacturers AssociationLloyds Register of Shipping British Pump Manufacturers AssociationLondon Transport Executive British Steel CorporationMachine Tool Industry Research Association* British Steel IndustryMinistry of Defence* British Valve Manufacturers Association Ltd.National Coal Board* CbmpeOil Companies Materials Association Chartered Institution of Building ServicesProcess Plant Association Crown Agents for Oversea Governments andRailway Industry Association of Great Britain AdministrationsSociety of Motor Manufacturers and Traders Department of Industry (MechanicalLtd. Engineering)Telecommunication Engineering and Department of Industry (National EngineeringManufacturing Association (TEMA) Laboratory)Water-tube Boilermakers Association Department of the Environment (PSA) Ball and Roller Bearing ManufacturersSociety of British Aerospace Companies AssociationLimited North East Coast Institution of Engineers and Shipbuilders Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 © BSI 10-1999i Contents Page Cooperating organizationsInside front cover National forewordii 1Scope and field of application1 2References1 3Symbols1 4Flange dimensions1 Annex A Flange dimensions for additional cups6 Table 1 Contact angle series 22 Table 2 Contact angle series 33 Table 3 Contact angle series 44 Table 4 Contact angle series 75 Table 5 Flange width6 Table 6 Flange height6 Publications referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 ii © BSI 10-1999 National foreword Part 3 of BS 3134 has been prepared under the direction of the Mechanical Engineering Standards Committee and, as foreshadowed in the foreword to the 1979 edition of Part 1 of the standard, is identical with ISO 355:1977/Addendum 2:1980 “Metric tapered roller bearings Flanged cups Boundary dimensions” prepared by Technical Committee ISO/TC 4, Rolling bearings, of the International Organization for Standardization (ISO). With regard to the reference to ISO 582, it should be noted that BS 3134-1, in which the series designations and boundary dimensions complying with ISO 355 for single row bearings were implemented, also includes chamfer dimensions for tapered roller bearings. It should be noted that in ISO 355/Addendum 2 reference has been made in error to ISO/R 492 which does not apply to tapered roller bearings. The tolerances for such bearings will be specified in the current revision of that International Standard and have already been included in BS 3134-1. Terminology and conventions. The text of the addendum to the International Standard has been approved as suitable for publication, without deviation, as Part 3 of BS 3134. Some terminology and certain conventions are not identical with those used in British Standards; attention is especially drawn to the following. The comma has been used throughout as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Where the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International StandardCorresponding British Standard ISO 355:1977BS 3134 Metric tapered roller bearings: Part 1:1979 Specification for dimensions and tolerances of single row bearings (Technically equivalent) ISO/R 492:1966Not applicable in the context of this standard, see national foreword, second paragraph. ISO 582:1979BS 5988:1980 Specification for minimum and maximum chamfer dimensions of metric series roller bearings (Identical, but see national foreword, second paragraph) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 © BSI 10-19991 1 Scope and field of application This International Standard specifies flange dimensions of flanged cups for a selection of metric tapered roller bearings. All other dimensions for cups and complete bearings are given in International Standard ISO 355. Tolerances are given in ISO/R 492 and ISO 582. Flange dimensions suitable for flanged cups of bearings not comprised in the selection, are given in the Annex A, which does not form an integral part of this International Standard. 2 References ISO 355, Rolling bearings Metric tapered roller bearings Boundary dimensions and series designations. ISO/R 492, Rolling bearings Radial bearings Tolerances. ISO 582, Rolling bearings Metric series bearings Chamfer dimension limits. 3 Symbols 4 Flange dimensions Table 1 to Table 4 give outer ring flange dimensions for metric tapered roller bearings grouped by contact angle series. (Contact angle series and dimension series are given in ISO 355.) Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 2 © BSI 10-1999 Table 1 Contact angle series 2 Dimensions in millimetres DD1 C2 Dimension series 2CD2CE2DB2DD2DE2EE2FB2FD2FE2GB2GD 404433 42 47 46 51 3 3 3 3 4 52 62 57 67 3,5 4,5 3,5 4 4,5 5 65704,5 72 75 77 79 4,5a 5 4 6 75 80 80 84 4,5b 4,5 808554,56 90 90 94 95 5 4,5 6 95 100 99 104 5 5 10010657 110 115 116 121 5 5 5 8 120 125 127 131 5,5 5,5 8 1301365,5 130 140 137 146 6 5,5 8 140 145 147 151 6 6 8 1501566 150 160 158 168 7,5 7 7 10 10 170 170 178 179 8,5 7 11 1801888,5 180 190 190 200 8 8 11 11 200 200 208 210 9 8 11 2102189 215 225 225 233 10 9 12 225 240 236 251 9,5 9,5 12 12 2602721113 a Bearing 2CE045 b Bearing 2CE040 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 © BSI 10-19993 Table 2 Contact angle series 3 Dimensions in millimetres DD1 C2 Dimension series 3CC3CD3CE3DB3DC3DE3EB3EC3EE3FB3FC3FD3FE 42463 44 52 48 57 3 3,5 62 65 67 70 3,5 3,5 4 68723,5 72 75 77 79 3,5 4 4,5 80 80 84 85 3,5 4,5 4 4,5 8590544,55 90 90 94 95 4 4 4,5 5,5 95 100 101 106 5 5 4,5 5 6 1101165,54,557 120 125 127 131 5 6 4,5 6 7 125 130 132 137 6 6 5 6 7 7 1401465,5 140 150 147 158 7 8 5 5 6 7 8 9 160 165 168 173 9 9 6 8 10a 1701796,5810 175 180 184 190 9 9 7 8 10 190 200 200 210 7 7 9 10 11b 10 28029211 a Bearing 3FE090 b Bearing 3FE105 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 4 © BSI 10-1999 Table 3 Contact angle series 4 Dimensions in millimetres DD1 C2 Dimension series 4CB4CC4DB4DC4EB4EC4FB4FC4FD4GB4GD 45 47 49 51 3 3 3 50 52 54 56 3 3 555933 58 60 62 64 3 3 62 65 66 69 3 3 70 75 75 80 3 3 85903 90 95 95 99 4 3 95 100 100 104 3 4 1001053 105 110 111 116 3 3 4,5 115 125 121 132 3 4 4,5 1301365 130 135 137 142 4 4 5 6 140 145 147 151 4 5,5 1451524 150 150 156 157 4 5,5 160 160 167 168 5 6,5 1701775 170 180 178 188 6,5 6,5 185 195 192 202 5 5 2002088 210 215 218 225 6 8 8 11 220 225 228 233 6 8,5 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 © BSI 10-19995 Table 3 Contact angle series 4 Table 4 Contact angle series 7 Dimensions in millimetres DD1 C2 Dimension series 4CB4CC4DB4DC4EB4EC4FB4FC4FD4GB4GD 2302386 230 240 241 248 6 9 8 11 250 260 261 268 7 10 9 12 2702787 270282912 290 320 298 330 7 8 340 370 350 380 8 9 400 420 410 432 10 10 Dimensions in millimetres DD1 C2 Dimension series 7FB7GB 62674 72 80 77 85 4 4,5 90 100 95 106 4,5 5 1101165 120 130 127 137 5,5 5,5 140 150 147 158 6 7 1601687 170 180 179 190 7 8 190 200 200 210 8 8 215 225 225 236 9 9,5 240 260 251 272 9,5 11 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 6 © BSI 10-1999 Annex A Flange dimensions for additional cups (Not part of this Standard.) A.1 Scope and field of application This annex gives flange dimensions suitable for use in cases where a flanged cup execution of a metric tapered roller bearing is desirable, but flange dimensions are not given in the body of this International Standard. The flanged cup thus obtained must be considered as a non-standard sub-unit, until its inclusion into the body of the International Standard has been agreed by ISO. A.2 Flange dimensions Table 5 Flange width Table 6 Flange height Dimensions in millimetres C C2 Contact angle seriesa OverIncl.23456 and 7 1633333 161934444 192245556 222555667 252866778 283167889 3135789910 354089101111 4045910111212 45521011121313 52601012131414 60701113141515 a Contact angle series are given in ISO 355. Dimensions in millimetres C2 D h1 OverIncl. 3 65 100 65 100 2 2,5 3 4 5 6 7 8 9 all all all all all all 3,5 3,5 4 4 5 5 10 400 400 5 6 11 12 13 14 15 all all all all all 6 6 6 7 7 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3:1981 © BSI 10-1999 Publications referred to See national foreword. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3134-3: 1981 ISO 355:1977/ Addendum 2: 1980 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 04:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI