IEC-61169-32-1999.pdf
NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 61169-32 Première édition First edition 1999-07 Connecteurs pour fréquences radioélectriques Partie 32: Connecteurs coaxiaux pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 1,85 mm (0,072 in) à verrouillage à vis Impédance caractéristique 50 ohms (type 1,85) Radio-frequency connectors Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling Characteristic impedance 50 ohms (type 1,85) Numéro de référence Reference number CEI/IEC 61169-32:1999 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 21:16:09 MSTNo reproduction or networking permitted without license from IHS -,-,- Numéros des publications Depuis le 1er janvier 1997, les publications de la CEI sont numérotées à partir de 60000. Publications consolidées Les versions consolidées de certaines publications de la CEI incorporant les amendements sont disponibles. Par exemple, les numéros dédition 1.0, 1.1 et 1.2 indiquent respectivement la publication de base, la publication de base incorporant lamendement 1, et la publication de base incorporant les amendements 1 et 2. Validité de la présente publication Le contenu technique des publications de la CEI est constamment revu par la CEI afin qu'il reflète l'état actuel de la technique. Des renseignements relatifs à la date de reconfir- mation de la publication sont disponibles dans le Catalogue de la CEI. Les renseignements relatifs à des questions à létude et des travaux en cours entrepris par le comité technique qui a établi cette publication, ainsi que la liste des publications établies, se trouvent dans les documents ci- dessous: «Site web» de la CEI* Catalogue des publications de la CEI Publié annuellement et mis à jour régulièrement (Catalogue en ligne)* Bulletin de la CEI Disponible à la fois au «site web» de la CEI* et comme périodique imprimé Terminologie, symboles graphiques et littéraux En ce qui concerne la terminologie générale, le lecteur se reportera à la CEI 60050: Vocabulaire Electro- technique International (VEI). Pour les symboles graphiques, les symboles littéraux et les signes d'usage général approuvés par la CEI, le lecteur consultera la CEI 60027: Symboles littéraux à utiliser en électrotechnique, la CEI 60417: Symboles graphiques utilisables sur le matériel. Index, relevé et compilation des feuilles individuelles, et la CEI 60617: Symboles graphiques pour schémas. * Voir adresse «site web» sur la page de titre. Numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. Consolidated publications Consolidated versions of some IEC publications including amendments are available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incor- porating amendment 1 and the base publication incorporating amendments 1 and 2. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is available in the IEC catalogue. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is to be found at the following IEC sources: IEC web site* Catalogue of IEC publications Published yearly with regular updates (On-line catalogue)* IEC Bulletin Available both at the IEC web site* and as a printed periodical Terminology, graphical and letter symbols For general terminology, readers are referred to IEC 60050: International Electrotechnical Vocabulary (IEV). For graphical symbols, and letter symbols and signs approved by the IEC for general use, readers are referred to publications IEC 60027: Letter symbols to be used in electrical technology, IEC 60417: Graphical symbols for use on equipment. Index, survey and compilation of the single sheets and IEC 60617: Graphical symbols for diagrams. * See web site address on title page. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 21:16:09 MSTNo reproduction or networking permitted without license from IHS -,-,- NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 61169-32 Première édition First edition 1999-07 Connecteurs pour fréquences radioélectriques Partie 32: Connecteurs coaxiaux pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 1,85 mm (0,072 in) à verrouillage à vis Impédance caractéristique 50 ohms (type 1,85) Radio-frequency connectors Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling Characteristic impedance 50 ohms (type 1,85) Commission Electrotechnique Internationale International Electrotechnical Commission Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 1999 Droits de reproduction réservés Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photo-copie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission3, rue de Varembé Geneva, Switzerland Telefax: +41 22 919 0300e-mail: inmailiec.ch IEC web site http:/www.iec.ch CODE PRIX PRICE CODES Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 21:16:09 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 61169-32 CEI:1999 SOMMAIRE Pages AVANT-PROPOS . 4 Articles 1Généralités 6 1.1Domaine d'application . 6 1.2Références normatives . 6 2Dimensions d'interface . 6 2.1Face d'accouplement et calibre . 6 2.1.1Dimensions Connecteurs de niveau 1 . 6 2.1.2Dimensions Connecteurs de niveau 0 . 12 2.1.3Calibres 16 3Procédures d'assurance de la qualité . 18 3.1Généralités . 18 3.2Valeurs assignées et caractéristiques 18 3.3Séquence d'essais et prescriptions 24 3.3.1Essais périodiques 24 3.4Procédures . 28 3.4.1Contrôle de la conformité de la qualité. 28 3.4.2Homologation et maintenance . 28 4Instructions pour l'élaboration des spécifications particulières. 28 4.1Généralités . 28 4.2Identification de la spécification particulière. 30 4.3Identification du composant. 30 4.4Caractéristiques 30 4.5Informations complémentaires. 30 4.6Choix des essais, des conditions d'essai et des sévérités 32 4.7Spécification particulière cadre pro-forma pour les connecteurs du modèle 1,85 34 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 21:16:09 MSTNo reproduction or networking permitted without license from IHS -,-,- 61169-32 IEC:1999 3 CONTENTS Page FOREWORD 5 Clause 1General 7 1.1Scope . 7 1.2Normative references 7 2Interface dimensions 7 2.1Mating face and gauge information 7 2.1.1Dimensions Grade 1 connectors . 7 2.1.2Dimensions Grade 0 connectors . 13 2.1.3Gauges . 17 3Quality assessment procedures 19 3.1General. 19 3.2Ratings and characteristics . 19 3.3Test schedule and inspection requirements . 25 3.3.1Periodic tests 25 3.4Procedures . 29 3.4.1Quality conformance inspection. 29 3.4.2Qualification approval and its maintenance 29 4Instructions for preparation of detail specifications 29 4.1General. 29 4.2Identification of the detail specification 31 4.3Identification of the component 31 4.4Performance . 31 4.5Additional information 31 4.6Selection of tests, test conditions and severities 33 4.7Blank detail specification pro-forma for type 1,85 connector. 35 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 21:16:09 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 61169-32 CEI:1999 COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE _ CONNECTEURS POUR FRÉQUENCES RADIOÉLECTRIQUES Partie 32: Connecteurs coaxiaux pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 1,85 mm (0,072 in) à verrouillage à vis Impédance caractéristique 50 ohms (type 1,85) AVANT-PROPOS 1)La CEI (Commission Electrotechnique Internationale) est une organisation mondiale de normalisation composée de l'ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI). La CEI a pour objet de favoriser la coopération internationale pour toutes les questions de normalisation dans les domaines de l'électricité et de l'électronique. A cet effet, la CEI, entre autres activités, publie des Normes internationales. Leur élaboration est confiée à des comités d'études, aux travaux desquels tout Comité national intéressé par le sujet traité peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent également aux travaux. La CEI collabore étroitement avec l'Organisation Internationale de Normalisation (ISO), selon des conditions fixées par accord entre les deux organisations. 2)Les décisions ou accords officiels de la CEI concernant les questions techniques représentent, dans la mesure du possible un accord international sur les sujets étudiés, étant donné que les Comités nationaux intéressés sont représentés dans chaque comité détudes. 3)Les documents produits se présentent sous la forme de recommandations internationales. Ils sont publiés comme normes, rapports techniques ou guides et agréés comme tels par les Comités nationaux. 4)Dans le but d'encourager l'unification internationale, les Comités nationaux de la CEI s'engagent à appliquer de façon transparente, dans toute la mesure possible, les Normes internationales de la CEI dans leurs normes nationales et régionales. Toute divergence entre la norme de la CEI et la norme nationale ou régionale correspondante doit être indiquée en termes clairs dans cette dernière. 5)La CEI na fixé aucune procédure concernant le marquage comme indication dapprobation et sa responsabilité nest pas engagée quand un matériel est déclaré conforme à lune de ses normes. 6) Lattention est attirée sur le fait que certains des éléments de la présente Norme internationale peuvent faire lobjet de droits de propriété intellectuelle ou de droits analogues. La CEI ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de propriété et de ne pas avoir signalé leur existence. La Norme internationale CEI 61169-32 a été établie par le sous-comité 46D : Connecteurs pour fréquences radioélectriques, du comité d'études 46 de la CEI: Câbles, fils, guides dondes, connecteurs et accessoires pour communications et signalisation. Le texte de cette norme est issu des suivants: FDISRapport de vote 46D/322/FDIS46D/326/RVD Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant abouti à l'approbation de cette norme. Cette publication a été rédigée selon les Directives ISO/CEI, Partie 3. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 21:16:09 MSTNo reproduction or networking permitted without license from IHS -,-,- 61169-32 IEC:1999 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling Characteristic impedance 50 ohms (type 1,85) FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3)The documents produced have the form of recommendations for international use and are published in the form of standards, technical reports or guides and they are accepted by the National Committees in that sense. 4)In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-32 has been prepared by subcommittee 46D: RF connectors, of IEC technical committee 46: Cables, wires, waveguides, r.f. connectors and accessories for communication and signalling. The text of this standard is based on the following documents: FDISReport on voting 46D/322/FDIS46D/326/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table.