【企业】电子厂客户稽核改善报告范本PPT.ppt

ISSUES FOR NOKIA AUDIT,BUILD PROTECTED TRANSPORTATION ROUTES BETWEEN THE FACTORIES,1. Background and Objective,Importance to build ASAP protected transportation routes between the factories is emphasized.Now there is a potential risk for damage on WIP.,Analysis of the current logistics in factory,A1,A3,A2,A6,Air compressor station,A5,Buffer,Entrance,2.Analysis of the current A2 or A3/A6 carriage method.,Key message: 1. Use W carriers to move the WIP now, 300pnl(250kg) each time; 2.In order to prevent products from falling and rain ,We use the PE film to wrap products and W carriers. 3. The model has no protection of temperature and humidity,seriously be affected by vibration,and has a potential risk for damage on WIP.,Key message: The W wheel will use twice elevator in handling process,and the height of 4 factories is different with each other,the safety is not good;In the process of load and unload W wheel,There is a high scratch risk for damage on WIP.,3. Handling model A model,Air piazza,elevator,Handling model B model,Key message: Use the improved W wheel which decrease vibration effectively and wear-resistant move the WIP between the factories.,Less vibration No protection of temperature and humidity,Handling model C model,C model use truck carrier to move the WIP between the factories, use the rear board which power is hydraulic pressure in order to push or pull the carrier conveniently,and we will redesign the protected products lay out in carrier.,Low efficiency; Heavy cost,Handling model D model,D model:First, lay the L rack on the special pallet, then we move the special pallet from A2 plant to A3/A6 plant with forklift.,Effectively protect WIP from demage of tempreture and humidity Avoid vibration. Fulfill requirement of quality.,A2-A3/A6,about 200m,deliver about 2min.,Sealed completely, thermal insulation material inner surface.,parison chart,5.Schedule,Key message: Before we buy the rack to take D model,we will take the B model.,THE END Thank you!,